Stertil’s WE collapsible framed dock shelter has been specially developed to fulfil the requirement for cost effective accommodation of a wide range of vehicle parameters.
The vehicle reverses into the dock shelter with the driver able to centralise on the clearly visible guidance chevrons on the side curtains. When the vehicle is fully docked, the curtains are pushed clear of the loading opening creating an unobstructed entrance for fork lifts into the vehicle. The standard width of the WE dock shelter is 3,400mm. Over the years, this has proven to be the best dimension giving an excellent combination of seal and wear characteristics.
Specifications
Type WE 574
3 mm thick reinforced vinyl with double spring loaded
monofilament polyester high puncture, tear and abrasionresistance
for effective sealing even in windy conditions.
General
black curtains.
on each side curtain a white chevron guide marker is placed
to assist the driver when reversing his vehicle.
a cord between the tops of the side curtains retains the
correct positioning of the head curtain.
Framing
The WE-series dock shelters have a flexible galvanized
steel framing with the followingspecifications:
Framing build of square steel profiles
Four flat steel hinge-arms placed between the front and
rear frame. A solid construction avoids the side frames
splaying outwards under load.
Black cladding of PVC 620 gr./m2
Top panel with a slope to the front of 100mm for drainage
Plastic edge channel at the front of the top panel to lead
rainwater away to the sides.
Mounting
Quick and simple mounting to a flat wall surface. All curtains
and aluminium cover-profiles are pre-mounted to the steel
frame. For mounting to the wall, three holes have been drilled
into the side frames and just one in the top frame.
The connection between the different frame parts is so solid
that more mounting-points are not necessary.
